What Are the Safety Precautions for Juice Filling Machine?

Juice filling machine is a machine for filling beverages. It can fill carbonated beverages, carbonated water, soda and other carbonated beverages, and can also be used to fill juice beverages, purified water and other non-sparkling beverages. The juice filling machine is filled under the pressure of the bottle is less than atmospheric pressure, suitable for liquids of various viscosities, such as oil, syrup, fruit wine, etc. can be used for this filling.

Using a beverage filling machine for beverage filling can greatly improve the filling efficiency, but when operating the machine, it is necessary to pay attention to safety.

Before use, it is necessary to test run, by observing whether the direction of operation is correct, whether the pressure of the filling machine is normal, whether the motor and bearings are operating normally, whether lubricating oil is needed, and also need to pay attention to whether the solid parts of the beverage filling machine are loose .

When the drinking water filling machine passes the inspection before use, it can be used. It is necessary to pay attention to whether the safety equipment functions properly during use. Before reopening after each shutdown, you need to check the water tank, chain plate, conveyor belt, lid storage box, etc. for abnormalities, and pay attention to whether the water source, power supply, and air source are connected. Power QF, power indicator light is on, fault indicator light and emergency stop indicator light are not on, you can press the start button on the operation control box and the start switch at the filling place to start the overall operation of the machine. Press the stop button at the installation place and the control box. After stopping, the main power supply should be turned off.

Juice Filling Machine

In the entire juice filling machine, the operation control box is used as a device for controlling the beverage filling machine. In the past, it was generally designed or used for a large-size box. This is mainly for safety reasons, which can ensure that the staff is doing During operation control, there will be no safety accidents due to performance problems of the operation control box. The juice filling plant reminds you:

1. Observe the mechanical parts frequently during production to see whether the rotation and lifting are normal, whether there are abnormalities, and whether the screws are loose;

2. Check the ground wire of the equipment and ensure reliable contact; clean the weighing platform frequently; check the pneumatic pipeline for leaks and whether the trachea is broken;

3. The reducer motor is replaced with lubricating oil (grease) every year, check the tightness of the chain, and adjust the tension in time;

4. If you stop using it for a long time, you should empty the materials in the pipeline;

5. Do a good job of cleaning and sanitation, keep the surface of the machine clean, often remove the accumulated materials on the scale body, and pay attention to keeping the interior of the electric control cabinet clean;

6. The sensor is a high-precision, high-sealing, high-sensitivity device. Impact and overload are strictly prohibited. It must not be touched during work. Disassembly is not allowed for non-overhaul.